ZEONOR®
Basic properties		 Back

Property Unit Measurement method Conditions ZEONOR
1020R 1060R
Specific gravity – ASTM D792 – 1.01 1.01
Water absorbency % ASTM D570 – <0.01 <0.01
Light transmittance % ASTM D1003
 Thickness of
3 mm		 92 92
Glass transition temperature °C JIS K7121 – 102 100
Heat distortion temperature °C ASTM D648
 1.80MPa 101 99
Linear expansion coefficient cm/cm
°C		 ASTM E831 – 7×10-5 7×10-5
MFR g/10min ISO 1133 280°C,
21.18N		 20 60
230°C,
21.18N		 – 14
Flexural modulus MPa ISO 178 – 2100 2100
Flexural strength MPa ISO 178 – 80 76
Tensile modulus MPa ISO 527 – 2200 2100
Tensile strength MPa ISO 527 – 53 53
Tensile elongation % ISO 527 – 90 60
Izod impact strength J/m ASTM D256 With notch 60 18
Dupont impact strength J – – 36 26
Rockwell hardness – ASTM D785
 M scale 20 20
Volume resistibility Ωm IEC93 – >1016 >1016
Dielectric breakdown strength KV/mm ASTM D149 – 70 70
Dielectric constant – IEC250 1MHz 2.3 2.3
Dielectric loss tangent – IEC250 1MHz 0.0002 0.0002
Flammability – UL-94 – 94HB 94HB
Characteristics – – – High strengh High fluidity
Data represents experimental results and does not guarantee specific performance levels under actual usage.
*Please inquire concerning heat-resistant grades.



Page top